Propane - Addon-MBE

People who prefer cooking outdoors normally prefer burners with high pressure like the propane cast burner as they give a higher output of heat compared to the burner’s with low pressure.

Low pressure propane burners need either propane gas or natural gas with low pressure regulator incase the source of fuel is propane tank. Burners with low pressure produce heat which can be compared to the heat produced by any gas stove burner in the kitchen.

Cast Iron burner is the best for any of the propane cookers. In the entire test conducted to check the quality of these burners the iron cast propane burners performed outstandingly in comparison to the other similar cast burners of propane. This best looking, highest quality and highest performing cast iron propane burner sold in the marketplace.

This iron cast propane burners produces up to BTU/hr 160,000 and that to does in a much directed manner. This propane iron cast burner is made with 3/8” flare fit and air shutter. The bolt present right at the bottom of the propane cast burner is a wide 10mm. These propane cast iron burners are outfitted with the Insect protector screen. Most of the outdoor cooking electronics are generally stored in areas which have tiny insects like dirt dobbers and spiders setting up their house. These insects usually have an irritating tendency to build their nest in dark and small places which also include the inner side of the cast iron burner.

Any kind of difficulty the cast reduces its ability to perform and in such cases the cast propane burners have to be dismantled and then cleaned. The insect guard screen helps to prevent these kinds of problems from occurring.

The working space from the top of the cast till the bottom of the warm surface is around 4 to 5”. Burner head has a diameter of 4”. Height from the base to the top is 3 ¼”. The distance from the bottom rim of this propane iron cast burner head till the air inlet present at the border of cast is 5”.

The finest and the most efficient propane cast burner with venture design. This unique kind of burner is apt for applications wherein the venturi is placed outside or far away from the specific area where the burner has been installed. The pipe should be placed in such a manner that there should not be any elbows. The pipe has to be kept straight.